Eureka 32009L0105 Sign in

vessel

as defined in Directive 2009/105/EC of the European Parliament and of the Council of 16…, Article 1(3), point (a)

any welded vessel subjected to an internal gauge pressure greater than 0,5 bar which is intended to contain air or nitrogen and which is not intended to be fired. The parts and assemblies contributing to the strength of the vessel under pressure shall be made either of non-alloy quality steel or of non-alloy aluminium or non-age hardening aluminium alloys. The vessel shall be made of either: (i) a cylindrical part of circular cross-section closed by inwardly dished and/or flat ends which revolve around the same axis as the cylindrical part; or (ii) two dished ends revolving around the same axis. The maximum working pressure of the vessel shall not exceed 30 bar and the product of that pressure and the capacity of the vessel (PS x V) shall not exceed 10 000 bar.l. The minimum working temperature must be no lower than – 50 °C and the maximum working temperature must not be higher than 300 °C for steel and 100 °C for aluminium or aluminium alloy vessels

Open in the act with Eureka

Install the extension for EUR-Lex

Also defined in